clean up

numworks_port/Makefile

@@ -87,5 +87,6 @@ $(BUILD_DIR)/$(TARGET).bin: $(BUILD_DIR)/$(TARGET).elf
 .PHONY: clean
 clean:
 	rm -f $(BUILD_DIR)/*.o
+	rm -f $(BUILD_DIR)/Laplace/*.o
 	rm -f $(BUILD_DIR)/$(TARGET).elf
 	rm -f $(BUILD_DIR)/$(TARGET).bin

numworks_port/src/Laplace/gpio_helper.c

@@ -0,0 +1,84 @@
+#include "gpio_helper.h"
+
+uint8_t GPIOA_state = 0;
+uint8_t GPIOB_state = 0;
+uint8_t GPIOC_state = 0;
+uint8_t GPIOD_state = 0;
+uint8_t GPIOE_state = 0;
+
+void set_output_pin(uint8_t gpio_x, uint8_t pin, bool state){
+    switch (gpio_x)
+    {
+    case GPIO_A:
+        if(state){
+            GPIOA_state |= (1 << pin);
+        }else{
+            GPIOA_state &= ~(1 << pin);
+        }  
+        GPIOA->ODR = GPIOA_state;
+        break;
+
+    case GPIO_B:
+        if(state){
+            GPIOB_state |= (1 << pin);
+        }else{
+            GPIOB_state &= ~(1 << pin);
+        }  
+        GPIOB->ODR = GPIOB_state;
+        break;
+
+    case GPIO_C:
+        if(state){
+            GPIOC_state |= (1 << pin);
+        }else{
+            GPIOC_state &= ~(1 << pin);
+        }  
+        GPIOC->ODR = GPIOC_state;
+        break;
+    
+    case GPIO_D:
+        if(state){
+            GPIOD_state |= (1 << pin);
+        }else{
+            GPIOD_state &= ~(1 << pin);
+        }  
+        GPIOD->ODR = GPIOD_state;
+        break;
+
+    case GPIO_E:
+        if(state){
+            GPIOE_state |= (1 << pin);
+        }else{
+            GPIOE_state &= ~(1 << pin);
+        }  
+        GPIOE->ODR = GPIOE_state;
+        break;
+    
+    default:
+        break;
+    }
+}
+
+void enable_gpio_x_rcc(uint8_t gpio_x){
+    switch (gpio_x)
+    {
+        case GPIO_A:
+            RCC->AHB1ENR   |= RCC_AHB1ENR_GPIOAEN ;
+            break;
+        case GPIO_B:
+            RCC->AHB1ENR   |= RCC_AHB1ENR_GPIOBEN ;
+            break;
+        case GPIO_C:
+            RCC->AHB1ENR   |= RCC_AHB1ENR_GPIOCEN ;
+            break;
+        case GPIO_D:
+            RCC->AHB1ENR   |= RCC_AHB1ENR_GPIODEN ;
+            break;
+        case GPIO_E:
+            RCC->AHB1ENR   |= RCC_AHB1ENR_GPIOEEN ;
+            break;
+        
+        default:
+            break;
+    }
+}

numworks_port/src/Laplace/gpio_helper.h

@@ -0,0 +1,22 @@
+/** @file gpio_helper.h
+ * 
+ * @brief Control all the GPIO
+ *
+ */ 
+
+#ifndef GPIO_HELPER_H
+#define GPIO_HELPER_H
+
+#include "stdbool.h"
+#include "../device/stm32f730xx.h"
+
+#define GPIO_A 0
+#define GPIO_B 1
+#define GPIO_C 2
+#define GPIO_D 3
+#define GPIO_E 4
+
+void set_output_pin(uint8_t gpio_x, uint8_t pin, bool state);
+void enable_gpio_x_rcc(uint8_t gpio_x);
+
+#endif

numworks_port/src/Laplace/laplace.c

@@ -0,0 +1,7 @@
+#include "laplace.h"
+
+void laplace_init(){
+    // Enable the GPIO peripheral in RCC.
+    enable_gpio_x_rcc(GPIO_B);
+    led_init();
+}

numworks_port/src/Laplace/laplace.h

@@ -0,0 +1,15 @@
+/** @file laplace.h
+ * 
+ * @brief Global function of Laplace
+ *
+ */ 
+
+#ifndef LAPLACE_H
+#define LAPLACE_H
+
+#include "gpio_helper.h"
+#include "led.h"
+
+void laplace_init();
+
+#endif

numworks_port/src/Laplace/led.c

@@ -1,7 +1,7 @@
 #include "led.h"
 
-// Variable to store the current state of LEDs
-uint8_t led_state = 0;
+// GPIOB for all the leds
+uint8_t gpio_b = GPIO_B;
 
 void led_init(){
     // It should be set to push-pull low-speed output.
@@ -23,37 +23,19 @@ void led_init(){
 }
 
 void set_led_red(bool state){
-    if(state){
-        led_state |= (1 << RED_LED_PIN);
-    }else{
-        led_state &= ~(1 << RED_LED_PIN);
-    }
-    GPIOB->ODR = led_state;
+    set_output_pin(gpio_b, RED_LED_PIN, state);
 }
 
 void set_led_green(bool state){
-    if(state){
-        led_state |= (1 << GREEN_LED_PIN);
-    }else{
-        led_state &= ~(1 << GREEN_LED_PIN);
-    }
-    GPIOB->ODR = led_state;
+    set_output_pin(gpio_b, GREEN_LED_PIN, state);
 }
 
 void set_led_blue(bool state){
-    if(state){
-        led_state |= (1 << BLUE_LED_PIN);
-    }else{
-        led_state &= ~(1 << BLUE_LED_PIN);
-    }
-    GPIOB->ODR = led_state;
+    set_output_pin(gpio_b, BLUE_LED_PIN, state);
 }
 
 void set_led_all(bool state){
-    if(state){
-        led_state = (1 << RED_LED_PIN) | (1 << GREEN_LED_PIN) | (1 << BLUE_LED_PIN);
-    }else{
-        led_state = 0;
-    }
-    GPIOB->ODR = led_state;
+    set_output_pin(gpio_b, RED_LED_PIN, state);
+    set_output_pin(gpio_b, GREEN_LED_PIN, state);
+    set_output_pin(gpio_b, BLUE_LED_PIN, state);
 }

numworks_port/src/Laplace/led.h

@@ -13,6 +13,7 @@
 
 #include <stdbool.h>
 #include "../device/stm32f730xx.h"
+#include "gpio_helper.h"
 
 void led_init();
 void set_led_red(bool state);

numworks_port/src/info_headers.cpp

@@ -1,5 +1,5 @@
 #include <assert.h>
-#include <cstdint>
+#include <stdint.h>
 #include <stddef.h>
 
 #define byte4 0xFF, 0xFF, 0xFF, 0xFF

numworks_port/src/main.c

@@ -0,0 +1,8 @@
+#include "main.h"
+
+// this is our main function, I separated it from the c++ code because I don't like this language
+main_entry(){
+    // init all the peripherals
+    laplace_init();
+    set_led_all(true);
+}

numworks_port/src/main.h

@@ -0,0 +1,15 @@
+/** @file led.h
+ * 
+ * @brief Control the led
+ *
+ */ 
+
+#ifndef MAIN_H
+#define MAIN_H
+
+#include "Laplace/laplace.h"
+#include "Laplace/led.h"
+
+void main_entry();
+
+#endif

numworks_port/src/start_handler.cpp

@@ -2,7 +2,9 @@
 #include <stddef.h>
 #include <stdint.h>
 #include "device/stm32f730xx.h"
-#include "Laplace/led.h"
+extern "C" {
+  #include "main.h"
+}
 
 //#define LED_PIN    (4) // PB0
 
@@ -58,22 +60,6 @@ void __attribute__((noinline)) start() {
   size_t bssSectionLength = (&_bss_section_end_ram - &_bss_section_start_ram);
   memset_custom(&_bss_section_start_ram, 0, bssSectionLength);
 
-  // Enable the GPIO peripheral in RCC.
-  RCC->AHB1ENR   |= RCC_AHB1ENR_GPIOBEN ;
-  led_init();
-  set_led_green(true);
-  set_led_red(true);
-  /*
-  // B0 is connected to the LED.
-  // It should be set to push-pull low-speed output.
-  GPIOB->MODER  &= ~(0x3 << (LED_PIN*2));
-  GPIOB->MODER  |=  (0x1 << (LED_PIN*2));
-  GPIOB->OTYPER &= ~(1 << LED_PIN);
+  main_entry();
   
-  GPIOB->ODR = (1 << LED_PIN);
-  */
-  while (0)
-  {
-    // code
-  }
 }